SACC-DSI-M 8FS-4CON-L180

https://www.phoenixcontact.com/us/products/1694376 Flush-type connector - SACC-DSI-M 8FS-4CON-L180 - 1694376 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, female, 4-pos., M8, rear/screw mounting with M12 thread, with straight solder connection   Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc Weight per Piece (excluding packing) 13.76 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 50 V AC 60 V DC Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M8 connector IEC 61076-2-104 Status display No Overvoltage category II Pollution degree 3 Connection method Solder pins 12/06/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1694376 Flush-type connector - SACC-DSI-M 8FS-4CON-L180 - 1694376 Technical data General Mounting type Rear mounting M12 x 1 With flat nut Material Flammability rating according to UL 94 HB Contact material CuSn Contact surface material Au Contact carrier material PA 66 Material, knurls Nickel-plated brass Sealing material NBR Standards and Regulations Standard designation M8 connector Standards/regulations IEC 61076-2-104 Connection in acc. with standard CUL Flammability rating according to UL 94 HB Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 12/06/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1694376 Flush-type connector - SACC-DSI-M 8FS-4CON-L180 - 1694376 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 4A Nominal voltage UN 125 V cUL Recognized      Nominal current IN 4A Nominal voltage UN 125 V EAC  EAC  cULus Recognized  Drawings 12/06/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1694376 Flush-type connector - SACC-DSI-M 8FS-4CON-L180 - 1694376 Dimensional drawing Schematic diagram Ø12,2 +0,1 max.4,0 4 2 3 1 Pin assignment M8 socket, 4-pos., view female side 10+0,1 Housing cutout for M8 flush-type connector, socket, one-section Drilling diagram Dimensional drawing 14,5 9,5 4,5 10 M8x1 Ø0,6 +0,05 Ø0,8 Ø3,4 10 M8 flush-type socket 3 14 M12x1 1,95 0,5 max. 4,5 M8 flush-type socket Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/06/2015   Page 4 / 4